Choice from options:
-
Extra doors in front wall
-
Extra doors in side wall
- Extra windows in back wall
-
Non-standard design of the front wall (hinged lower section)
-
KOMFORT ground rails with semi-automatic system for anchoring the enclosure to the base (Komfort)
-
KOMFORT ground rails with automatic system for anchoring the enclosure to the base (Komfort plus)
-
Brush at the bottom of the front walls (up to 150 mm high)
-
Increased height of enclosure
-
Extension of ground rails beyond the length of the enclosure
-
and optional items listed belowe:
-
The entrance to the enclosure may be a swinging door (with or without a brush bottom) or sliding door (with brush bottom). The doors may be single or double. The standard width of a single door is 80-90cm. In the side of most segments it is possible to place a sliding door, which may serve either as an additional entrance or as an alternative to a door in the front wall, especially in the case of low enclosures.
-
Another method of providing access to enclosures is to construct the lower side walls with vertically sliding polycarbonate panels.
- In large or dome-shaped enclosures windows may be fitted to improve ventilation.
- If there is an obstacle, for example a pool ladder, hydrojet or raised pool edge, the enclosure is provided with a hinged lower wall section which can be lifted in order to slide the wall over the obstacle.
 |
Model UNIVERSE with lift up front wall |
|
 |
 Models Elegant |
|
|
Electronic sliding system
|
- The engine set comprises two drive units enclosed in small covers, while the control set includes remote control and desktop control.
-
A ground-rail track is required.
-
It can be integrated with weather and rain sensors and an internal thermostat.
-
The electronic movement system can be powered from the mains or by solar panels.
|
|
ELECTRIC DRIVING UNIT
for standard models of pool enclosures
Using the electric drive mounted on the enclosure is much more convenient and easy for manipulation of the elements. Two ROTOLINE electric drives form parts of the driving unit. Drives are fixed to the movable enclosure elements at their lower part. Operation of the drives is easy, using remote control. Drives are powered by rechargeable battery, which may also be charged by solar panel.
|
|
|
A SOLAR POWERED UNIT CONSISTS OF:
1/ driving unit
2/ solar panel
3/ remote control
|
|
|
TECHNICAL PARAMETERS
SOLAR PANEL:
Length: 500 mm
Width: 320 mm
Thickness: 12.5 mm
Wire: 1 m 2x 0.75mm2
( brown + / blue - )
Power: 7 W
Current load / 16V: 0.5 A
ELECTRICAL DRIVE (dimensions)
Length: 450 mm
Width: 150 mm
Height: 260 mm
Max. drawing force: 350 N
Speed: 27cm/s
Power: 18 W á 120 W
Battery: 12 V / 7 Ah
|
|
Electrical Drive Unit
|
> PDF file 387 kB for Download
|
|
Side doors
Homepage
Back to top
Previous page
